Revised Spec trx 2.0

Trx 850 frame with rear side tubing removed. FCR41's with open bell mouths, single cable throttle, r6 1999 radiator fan removed, Full bore race exhaust from projection components. R1 aluminium front fairing frame, Modified R1 yokes with trx stem( projection components ), complete R1 front end. Nitron 3 way race shock, yzr750 rear end. Renthal 520 chain conversion race sprockets from Thundercat Modified cheapo 'Rear sets' lightweight from Thailand! Crankcase breather tube from generator and cylinder head to enclosed container under tank with filter. Modified R 7 fairing. A 2000 cbr6 glass fibre race seat. P&R racing GPS laptimer. Wiring loom kept original apart from the safety start soleniod removed....
Rear rain light fitted. clocks modified, just using Rev counter.

Weight TBA!

Saturday, 25 April 2015

Spare frame arrived today!

A few bits arrived, a spare frame for 200 quid complete with log book, wiring loom, clutch plates, and steering head bearings. I think I'll keep this intact without cutting the back end off like the other. In time I'll get the bent frame sorted out.
I'll have another go at the rear subframe as it was too complicated to take on and off. Atleast I'm not rushing to get it ready. I'll try and make a better job, also at the same time tinker with the Vfr race bike too. I can't see me racing this year, I have too many other jobs to do, plus even club racing requires a lot of disposable cash.....which I don't have anymore!

Thursday, 23 April 2015

Original frame out of line

This view shows how twisted the frame is, been pushed to the right about 12 mm

Wednesday, 22 April 2015

New stuff coming

Instead of getting the frame straightened I thought it's just as cheap to find a spare frame. so I found one and waiting for it to be delivered! Same time I've ordered a spare wiring loom and set of head bearings. I'm thinking of stripping the engine to tweak the top end.